GPS/INS复合制导技术

近年来随着制导技术的发展,国外许多新型的武器装备都采用了GPS/INS复合制导技术。介绍了国外GPS/INS复合制导技术的发展和应用,重点分析了惯性导航系统和全球定位系统的优缺点,综述了GPS/INS复合制导的工作原理和关键技术。文中列举了美国GPS/INS系统的小型化,以及GPS/INS复合制导系统在SM-3导弹、洲际导弹等多种导弹制导过程中发挥的作用。由此可见,掌握国外复合制导体系的发展动态对我国GPS/INS复合制导技术的发展将起到重要的借鉴和启示作用。     

陆军诸兵种合同作战兰切斯特方程的弹药消耗预测研究

描述了诸兵种合同作战的兰切斯特方程及其矩阵解,提出了一种通过兵力损耗换算弹药损耗的新思路,分析和确定了用该方法预测弹药消耗的相关参数,最后运用Matlab进行仿真计算,预测出了武器装备战损情况和弹药消耗情况。     

PS／2键盘接口在单片机中的应用研究

PS/2键盘接口由于采用标准PS/2协议通信,易于控制,在嵌入式系统中有良好的应用前景.针对如何使用这种接口,介绍了其物理接口及通信协议,重点对工作时序和部分命令字进行了说明.在应用中,给出了PS/2键盘与单片机的接口电路及通信方案,并提供相应的接口通信程序.     

加强三维制图教学 促进部队装备建设

为了提高武警部队装备研发的设计速度与水平,从满足部队装备建设的实际需要出发,阐述了军事装备学科的发展思路与方向。结合部队装备仿真设计和创新研制实例,简述了实体参数化设计软件Pro／Engineer的功能特点,阐明了加强三维制图教学的必要性及其在部队装备建设中的重要作用,以及不同学历层次Pro／Engineer的教学内容。对促进军事装备学本科与研究生教育,提高部队装备的开发建设水平具有意义。     

多源目标识别中冲突证据的融合策略研究

随着防空反导作战环境的日益复杂,快速准确地进行真假目标识别显得尤为重要。针对多源目标决策级识别中冲突证据融合问题,在综合分析现有改进证据理论方法的基础上,引入新的冲突度量系数,提出了一种通过在融合流程中增加智能判断环节,以冲突系数为判断依据,对具有不同冲突系数证据选择不同组合规则进行证据组合的融合方法,并给出了策略的流程图。最后进行了实例验证,结果表明新策略能对不同未知信度和不同识别框架冲突证据进行快速有效的融合。     

美军作战实验室建设研究

简要回顾了美军作战实验发展的历史,从军种到联合详细阐述了美军作战实验室完整的体系,并简要介绍了各作战实验室所完成的典型实验,研究了美军作战实验室主要的实验方法和技术手段,剖析了美军作战实验室的运行机制,探讨了美军作战实验室建设带给我们的启示。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。